Sound Recording - Leica Q Instructions Manual

Hide thumbs Also See for Q:
Table of Contents

Advertisement

Available languages

Available languages

Contrast, color saturation/rendering, focus
All options described starting on page 170, however, these
options must be selected for video recordings separately from
selection for photos.
Setting the function
1. Select
in the menu,
Video Settings
2. then
,
Contrast
Saturation
and
3. select the desired settings in the respective sub-menus
Color range
Video recordings are made with sRGB.
Stabilization
This function must be set for video recordings separately from the
setting for photos.
Setting the function
1. Select
in the menu,
Video Settings
2. then
in the sub-menu, and
Video Stabil.
3. select the desired setting in the corresponding sub-menu
, or
in the sub-menu,
Sharpness

Sound recording

Video recordings are normally recorded with sound. Sound is
recorded in stereo using the built-in microphones.
In order to achieve the desired volume or to improve audibility, you
can adjust the sensitivity of the microphone to fit the recording
situation.
Setting the function
1. Select
in the menu,
Video Settings
2. then
in the sub-menu, and
Microphone Gain
3. select the desired setting in the corresponding sub-menu
To reduce any noise caused by wind, a damping function is
available.
Setting the function
1. Select
in the menu,
Video Settings
2. then
in the sub-menu, and
Wind elimination
3. select the desired setting in the corresponding sub-menu
Notes:
• Both the focusing and autofocus operations cause noises which
are also recorded. In order to prevent this, you should refrain
from using these functions during an ongoing recording.
EN
199

Advertisement

Chapters

Table of Contents
loading

Table of Contents