Working Color Range; Image Stabilization - Leica Q Instructions Manual

Working color range

The requirements in terms of color reproduction differ considerably
for the various possible uses of digital picture files. Different color
ranges have therefore been developed, such as the standard RGB
(red/green/blue) that is perfectly adequate for simple printing. For
more demanding image processing using the corresponding
programs, e.g. for color correction, Adobe
established as the standard in the relevant sectors. ECI is used in
many cases for professional prepress work. The Leica Q makes it
possible to set the camera to one of these three color ranges,
meaning , , or
sRGB Adobe RGB
Setting the function
1. Select in the menu,
JPEG Settings
2. then in the sub-menu, and
Color Management
3. select the desired setting in the corresponding sub-menu
Notes:
• If you want to have your prints produced by major photographic
laboratories, mini labs, or Internet picture services, you should
select the setting.
sRGB
• The setting is only recommended for professional
Adobe RGB
image processing in color-calibrated working environments.
RGB has become
®
.
ECI-RGB

Image stabilization

The worse the lighting conditions are when taking a picture, the
slower the shutter speed has to be in order to achieve the right
exposure. This can quickly lead to shutter speeds for which image
blurring is a real problem. The optical picture stabilization of Leica
Q can compensate for subjects that don't move or only move very
slowly. Video recordings also benefit from a considerably steadier
picture composition.
The system is effective to several shutter speed levels, this makes
it possible for clear pictures to be produced using shutter speeds
that are slower than what would normally be feasible for a good
picture while holding a camera by hand.
Setting the function
1. Select in the menu and
OIS
2. turn off or on in the sub-menu
EN
171