Leica Q Instructions Manual page 225

Button control
1. Press the direction pad right or left until
2. Press the set button
3. Determine the cutoff points by pressing left or right on the
direction pad.
• The selected cutoff point will be shown in red.
4. Move the cutoff points with the thumb wheel
• During the process, the respective time is displayed as well
as the freeze frames for the selected start and end points.
5. Press the direction pad up and then left or right until
marked red
6. Press set button to confirm
sub-menu appears .
• The
Video Trimming
Further operation proceeds with the selection of one of three
is marked in red
options from the
control or with the use of the direction pad for selection and the
set button for confirmation.
Save as new
The new video is saved and the original one is also retained.
Overwrite
The new video is saved and the original one deleted.
Preview
is
The new video is shown. It is neither saved, nor is the original one
deleted.
• A corresponding notification may appear temporarily at first due
to the time required for the data to be processed, then the first
scene of the new video appears.
sub-menu, either through touch
Video Trimming
EN
221