Quick Access To Menu Functions - Leica Q Instructions Manual

QUICK ACCESS TO MENU FUNCTIONS

The FN button facilitates quick operation. While in picture mode
you can use it to directly access the menu function that you
previously configured the button for, e.g. the function that you
need most often. The following functions are available:
– White balance
– Exposure compensation
– Flash exposure compensation
– Exposure bracketing
– Scene program/exposure modes
– Photo file format
– Exposure metering method
– WLAN
– Self-timer
Configuration of the button
FN
1. Press and hold the button, or select
FN
in the menu and
2. select the desired function/function group in the sub-menu
In review mode, however, the
FN
opens the menu used to access the protection and slide show
sub-menu and provides direct access to the WLAN menu option.
FN button in LiveView
button has a fixed function. It
Use of the button
FN
Opening the established function/function group
Press the button
FN
Setting the functions/menu options opened by the
The process for setting these functions or menu options varies
depending on if the camera is in picture or review mode and
depending on if it is opened by pressing the
the menu control.
Further details or peculiarities can be found in the descriptions of
the individual functions in the respective sections.
In picture mode some menu options, such as
,
Exposure Compensation Exposure Bracketing
, as well as sub-menus such as
Flash Exp. Compensation
(
Color temperature White Balance
with it being possible to carry out one step alternatively using
button control. This applies, for example, to the
menu option when it is opened directly using the
below).
It works similarly for
Protection
nus, which can be reached in review mode using the
They too can be operated either through touch control or using
buttons.
button
FN
FN button or through
and
) are set using touch control
White Balance
FN button (see
, , and sub-me-
Slideshow WLAN
FN button:
EN
157