Shutter Release Button - Leica Q Instructions Manual

SHUTTER RELEASE BUTTON

The shutter release button works in two stages. Pressing it gently
(to the pressure point) activates both the automatic focusing (if set)
and the exposure metering and control systems, and saves the
relevant settings/values. If the camera was previously in standby
mode, this reactivates it and the monitor image appears again.
Before pressing the shutter release button all the way down, check
that the focusing/autofocus (if active) and exposure metering are
complete (for details on exposure setting,
ding displays on the monitor refer to pages 180 and 248).
Pressing the shutter button all the way down takes a picture.
Notes:
• The menu system can be used to select or set key acknowledg-
• The shutter button should be pressed gently and not jerkily to
AF , and the correspon-
ment (response) tones and shutter sound, and to adjust their
volume.
prevent blurring.
EN
151