Remote Control Of The Camera - Leica Q Instructions Manual

EN
WIRELESS DATA TRANSMISSION AND

REMOTE CONTROL OF THE CAMERA

You can control the camera remotely using a smartphone/tablet or
use the smartphone/tablet as an external storage medium. In
order to do this, the "
your smartphone. This app is available in the Google Play Store™
for Android™ devices as well as the Apple App Store™ for iOS™
devices.
Note:
In this section, the term "smartphone" refers to smartphones as
well as tablets.
Selecting the connection methods
There are two ways to establish a connection between your camera
and your smartphone. If you have access to WLAN, the
method may work best. When using this method, both the camera
and smartphone are in the same WLAN network. If no WLAN is
available, establishing a direct connection (
practical. When using this method, the camera generates an
access point where your smartphone can register.
226
Leica Q" app must fi rst be installed on
) may be most
Host
WLAN host setup
All of the settings under this menu option are preset at the factory.
Under the menu option
name of the camera in the network. It is recommended that you
retain the preset encryption method
, you will be able to defi ne a personal password.
Password
Establishing a connection with a smartphone in
Using an iOS device
Establishing a connection with QR code:
Client
1. Launch the
2. select
QR Code
3. Import the QR code shown on the camera using the
app
4. Install the "
5. First select
• A message will appear in the web browser on the iPad or
iPhone.
6. If a password is needed to unlock the iPhone, then this must
be entered
7. Click the home button to close the web browser
8. Select and activate
select the SSID displayed on the camera (from the factory:
Leica Q-*******)
you can change the
SSID/network name
. Under menu option
WPA2
Leica Q app on your iPhone and
" profi le on your iPhone
LEICA Q
, then , and then
Install Install Done
under on the iPhone.Then
WLAN Settings
mode
Host
Leica Q