Energy-Saving Settings; Acoustic Signals - Leica Q Instructions Manual

ENERGY-SAVING SETTINGS

In order to increase battery life, you can have the monitor and/or
camera shut off automatically after a specified period of time has
passed.
1. Select in the menu,
Power Saving
2. then or
Auto LCD Off Auto Power Off
3. select the desired settings in the respective sub-menus
If these functions are active, the camera switches to energy-saving
standby mode or the monitor switches off after the selected time.
Note:
Even if the camera is in standby mode, it can be activated again at
any time by pressing the shutter release button or by turning it off
and back on with the main switch.

ACOUSTIC SIGNALS

With the Leica Q you can decide whether you want your settings
and some other functions to be acknowledged by an acoustic
signal – two volumes are available – or whether operation of the
camera and actually taking photographs should be predominantly
in the sub-menu, and
free of noise.
1. Select
2. then
3. select the desired setting in the corresponding sub-menu
Setting the desired signals
1. Select
2. then select one of the four options
3. select the desired settings in the respective sub-menus
in the menu,
Acoustic Signal
in the sub-menu, and
Volume
in the menu,
Acoustic Signal
, and
AF Confirmation SD Card Full
, ,
Shutter Sound Keyclick
in the sub-menu, and
EN
161