Leica Q Instructions Manual page 172

EN
Manual setting by metering:
Using the menu or set button will close it, but the manual metering
will only be saved if the shutter button is pushed (2nd pressure
point).
With the button
FN
1. Press the button
FN
Using menu control
1. Press the button or press right on the direction pad
FN
• A yellow frame appears in the center of the monitor with an
instruction below it.
PLAY
DELETE
FN FN
ISO
MENU
2. Aim the frame at a uniform white or gray object that complete-
ly fi lls the frame
3. Press the shutter button to carry out metering and save the
result
The settings can then be retrieved using
168
Direct color temperature setting
Start:
When confi guring this function, there is only one step for which a
diff erence exists between opening with the FN button and with the
menu control.
With the
1. Press the
Using menu control
1. Press the
The further operation is identical in both cases.
2. Select the desired value on the corresponding scale
Details on how to proceed for the second step can be found on
page 158.
The scale will disappear again after 4s, further steps to change
settings can only be taken within this period of time.
or .
K has already been selected (see previous page)
button
FN
button
FN
button or press right on the direction pad
FN