Leica Q Instructions Manual page 229

Important:
• Use only the USB cable supplied.
• Do not interrupt the USB connection while data is being
transferred as this can cause the computer and/or the camera
to crash and may even cause irreparable damage to the memory
card.
• The camera must not be turned off or should not shut down due
to a lack of battery capacity while data is being transferred, as
this can cause the computer to crash.
• For the same reason, the battery must never be removed from the
camera while the connection is active. If the capacity of the
battery runs low during data transfer, a screen appears with the
battery capacity flashing. In this case cancel the data transfer,
turn off the camera, and charge the battery.
EN
225