Leica Q Instructions Manual page 160

EN
With the shutter release button
• The monitor image for picture mode appears.
PLAY
DELETE
FN FN
ISO
MENU
Note:
If the scale sub-menu is exited after being opened with the
button, then the settings will be immediately adopted. In the case
that the respective settings are not to be used, they must therefore
be reset in the scale sub-menu.
156
Exiting the menu with confi rmation of a setting
Press the button
MENU
• The monitor image for picture mode appears.
or
Press the shutter release button
• The monitor image for picture mode appears.
or
Press the button
PLAY
• The monitor image for review mode appears.
Notes:
• Depending on the other settings, some functions may not be
available. In this case, the relevant option is displayed in dark
gray in the menu and cannot be selected.
• The menu is normally opened at the position of the last option
FN
set.
• Some other functions are also controlled in the same basic way
once they have been opened, by pressing the corresponding
buttons:
– ISO for sensitivity
– for deleting image fi les/selecting the focus metering
DELETE
method (only in review or picture mode)
– FN for protecting image fi les or clearing delete protection
(only in review mode)
By contrast with the menu functions, the settings for these
functions can be confi rmed with the shutter release button (by
pressing to the fi rst pressure point). Further details can be found in
the relevant sections.