Leica SL2 - Digital Camera Quick Start Guide

PART DESIGNATIONS

1. Shutter button
   Tap:
   • Autofocusing
   • Activating exposure metering and exposure control
     Press down fully:
   • Shutter release
   • Video recording Start/Stop
     in standby mode:
   • The camera is reactivated
2. Front setting wheel
   in the menu:
   • Scrolling through the menu screens
     in recording mode:
   • depending on exposure mode, configurable (see table under "Wheel assignment")
     in review mode:
   • Zooming in/out of the frame
3. FN button**
   in recording mode:
   • Photo: ISO
   • Video: ISO (Cine: Exposure Index)
4. FN button**
   in recording mode:
   • Mode change photo/video
     in review mode:
   • Marking/rating a recording
5. Top display
   • Set operating mode
   • Recording data
   • Camera information
6. Accessory shoe
   Recommended flash units: Leica SF 40, SF 64 and SF 58
7. Microphone
   Sound is recorded in stereo
8. Speaker
9. FN button**
   in recording mode:
   • Photo: Magnification
   • Video: Microphone Gain
10. FN button**
    in recording mode:
    • Setting the AF metering method
11. Lens release button
12. Leica L bayonet
    
13. Contact strip
14. Self-timer LED / AF Assist Lamp / Sensor for exposure metering
15. Strap lugs
    
16. Main switch
    Switching the camera ON/OFF
17. Viewfinder eyepiece
18. Eye sensor
    Available settings: LCD panel only/ EVF only/ automatic switchover
19. Diopter setting ring
    Setting range: -4/+2 diopter
    
20. FN button**
    EVF/LCD panel switchover
21. Joystick
    in the menu:
    • Menu control
      in recording mode:
    • Shifting the AF metering field
    • Exposure lock (press and hold)
      in review mode:
    • Scrolling
    • Video playback control
22. Thumbwheel
    in the menu:
    • Menu control
      in recording mode:
    • depending on exposure mode, configurable (see table under "Wheel assignment")
      in review mode:
    • Scrolling
    • Video playback control
23. Status LED
    • Memory card access
    • Using the WLAN function
    • Charging via USB
24. PLAY button
    • Switchover between picture and playback/ review mode
    • Return to full-screen display
25. FN button**
    in Playback/Review mode:
    • Toggling info displays
26. MENU button
    in the menu:
    • Scrolling through the menu screens
      in recording mode:
    • Accessing the menu
      in review mode:
    • Accessing the Playback/Review menu
27. LCD panel
    
    3.2" TFT LCD, 1080 x 720 pixels, 2,332,800 dots, touch panel
28. Memory card slot
    UHS-II, UHS-I, SD/SDHC/SDXC
    
29. Tripod thread
    A 1⁄4 DIN 4503 (1⁄4") with stainless steel in the base
30. Contact for multifunction hand grip
31. Battery release lever
32. Battery compartment
    
33. *Hand grip-integrated battery compartment
34. *Hand grip lock

** Factory settings. Press & release: Call-up of assigned function. Press & hold: Modify assignment (drop-down list).

CHARGING THE BATTERY

*for a completely discharged battery

ATTACHING THE MULTIFUNCTION HAND GRIP*

LOAD USB/DATA TRANSFER

STATUS DISPLAY PHOTO

1. Focal length
2. Memory card used
3. Remaining memory capacity
4. Battery capacity
5. Menu section PHOTO
6. Menu sections VIDEO
7. Light balance
8. Exposure compensation scale
9. Exposure mode
10. Exposure value
11. Shutter speed
12. ISO Sensitivity
13. Exposure compensation VALUE
14. Picture mode (Picture sequence)
15. Autofocus mode

STATUS DISPLAY VIDEO

16. Autofocus metering method
17. Autofocus settings
18. Exposure metering method
19. White balance mode
20. File format/compression level/resolution
21. Formatting a memory card
22. User profile
23. Locking/unlocking the setting wheels
24. Leica FOTOS
25. Main menu
26. Microphone recording level
27. Recording time
28. Recording level
29. Headphone volume

INITIAL START/APP CONNECTION

SWITCHOVER: PHOTO/VIDEO

GESTURE CONTROL

WHEEL ASSIGNMENT (factory settings)

		Function assignment optionally for thumbwheel or front setting wheel
AF Lens		Program shift	Exposure Compensation
		Exposure Compensation	Microphone Gain
		Exposure Compensation	Shutter speed
		Aperture	Exposure Compensation
			Shutter speed
MF Lens		Magnification	Exposure Compensation
		Magnification	Exposure Compensation
		Magnification	Shutter speed

The function assignment can be switched between the two wheels.

• Select Direct Access Settings in the main menu
• Select Wheel Assignment (AF Lenses) / Wheel Assignment (MF Lenses) in the submenu
• Select the desired setting

LEICA FOTOS APP

Experience the new Leica FOTOS app. The Leica FOTOS app is a digital tool with plenty of exciting options and allows the photographer to get more out of his Leica camera than ever before. You can now link all your WLAN-capable Leica cameras via a single app to transfer images easily and instantly, capture the essence of unforgettable moments, manage, optimize and share your photos – anytime, anywhere.

TECHNICAL DATA

CAMERA

Designation
Leica SL2

Camera type
Mirrorless full-frame system camera

Type no.
2998

Order No.
10 854 EU/JP/US (black), 10 856 ROW (black)

Buffer memory
4 GB
DNG™: 78 recordings
JPG: > 100 recordings

Storage medium
UHS-II (recommended), UHS-I, SD/SDHC/SDXC memory card

Material
Full-metal housing made of aluminum and magnesium, leatherette cover, splash-water protected in compliance with IEC standard 60529 (protection type IP54).

Lens mount
Leica L bayonet with contact strip for communication between lens and camera

Operating conditions
-10 to +40°C

Dimensions (WxHxD)
146 x 107 x 42 mm

Weight
approx. 835 g (without battery)

SENSOR

Sensor size
CMOS sensor, pixel pitch: 4.3 µm
Fullframe (47.3 MP): 8368 x 5584 pixels
APS-C (20.2 MP): 5504 x 3664 pixels

Picture resolution
DNG™: 8368 x 5584 pixels (46.7 MP)
JPG: 8368 x 5584 pixels (46.7 MP), 6000 x 4000 pixels (24 MP), 4272 x 2848 pixels (12 MP)

VIEWFINDER/LCD PANEL

Viewfinder (EVF)
Resolution: 5,760,000 pixels (dots), 120 fps, magnification: 0.78x, aspect ratio: 4:3, frame coverage: 100%, exit pupil position: 21 mm, setting range +2/-4 diopters, with eye sensor for automatic switchover between viewfinder and LCD panel, time delay 0.005 s

LCD panel
3.2" (backlight LED) with anti-fingerprint and anti-scratch coating, 2,100,000 pixels (dots), format 3:2, touch control available

EQUIPMENT

WLAN
The Leica FOTOS app is required to use the WLAN function. The Leica app is available from the Apple App Store™ or the Google Play Store™. Complies with Wi-Fi IEEE802.11b/g/n, 2.4 GHz, channel 1-11 (2412-2462 MHz) and Wi-Fi IEEE802.11ac, 2.4 GHz & 5 GHz, channel 39-48 (5180-5240 MHz), channel 52-64 (5260-5320 MHz), channel 100-140 (5500-5700 MHz) (standard WLAN protocol), encryption method: WLAN-compatible WPA™/ WPA2™

Bluetooth
Bluetooth v4.2 (Bluetooth Low Energy (BLE)), 2402 to 2480 MHz

Menu languages
English, German, French, Italian, Spanish, Russian, Japanese, Simplified Chinese, Traditional Chinese, Korean

POWER SUPPLY

Rechargeable battery (Leica BP-SCL4)
Lithium-ion rechargeable battery, rated voltage: 7.2 V (DC); capacity: 1860 mAh (min.), approx. 370 recordings (based on CIPA standard, without EVF); charging time: approx. 140 min (after deep discharge); manufacturer: Panasonic Energy (Wuxi) Co. Ltd., Made in China

Charger (Leica BC-SCL4)
Input: AC 100–240 V, 50/60 Hz, 0.25 A, automatic switchover; Output: DC 8.4 V 0.85 A; Manufacturer: Salom Electric (Xiamen) Co., Ltd., Made in China

You will find the manufacturing date of your camera on the stickers in the Warranty Card and/or on the packaging. The date format is year/month/day. Subject to changes in design and production.

SAFETY REMARKS

GENERAL INFORMATION

• Do not use your camera in the immediate vicinity of devices with powerful magnetic, electrostatic or electromagnetic fields (e.g. induction ovens, microwave ovens, television sets or computer monitors, video game consoles, cell phones, broadcasting equipment). Their electromagnetic fields can interfere with recordings.
• Strong magnetic fields, e.g. from speakers or large electric motors can damage the stored picture data or disrupt recording.
• Switch off the camera, remove the battery and switch the camera back on in case of a camera malfunction due to the effects of electromagnetic fields.
• Do not use the camera in the immediate vicinity of radio transmitters or high-voltage power lines. Their electromagnetic fields may interfere with recordings.
• Always store small parts e.g. the accessory shoe cover as follows:
  • out of the reach of children
  • in a safe location, where they will not get lost or stolen
• State-of-the-art electronic components are sensitive to static discharge. Since people can easily pick up charges of several 10,000 volts by walking on synthetic carpets, a discharge can occur when you touch the camera, and especially it is placed on a conductive surface. A static discharge on the camera housing poses no risk for the electronics. Despite built-in safety circuits, you should avoid direct contact with external camera contacts like those in the flash shoe.
• Take care not to soil or scratch the sensor for lens detection (6-bit encoding) in the bayonet. You must similarly prevent direct contact of the bayonet with grains of sand or similar particles, as these could cause irreparable damage. This component must only be cleaned with a dry cloth (in system cameras).
• Use a cotton or linen cloth instead of a microfiber cloth from an optician's (synthetic) when cleaning the contacts. Make sure to discharge any electrostatic charge by deliberately touching a heating or water pipe (conductive, grounded material). Dirt deposits and oxidation on the contacts can be avoided by storing your camera in a dry location with the lens cap and the flash shoe/viewfinder cap (in system cameras) attached.
• Only use accessories specified for this model to prevent faults, short circuits or electric shock.
• Do not attempt to remove parts of the housing (covers) yourself. Repairs must be done at authorized service centers only.
• Protect the camera against contact with insect sprays and other aggressive chemicals. Petroleum spirit, thinner and alcohol must not be used for cleaning. Some chemicals and liquids can damage the camera housing or the surface finish.
• Rubber and plastics are known to expel aggressive chemicals and should therefore not be kept in contact with the camera for extended periods of time.
• Prevent any sand or dust or water penetration into the camera, e.g. during snowfall or rain or on the beach. Be extra careful when changing the lens (in system cameras) and when inserting or removing the memory card and rechargeable battery. Sand and dust can damage the camera, the lens, the memory card and the battery. Moisture can cause malfunctions and irreparable damage to the camera and memory card.

LENS

• A camera lens can have the effect of a magnifying glass when exposed to direct frontal sunlight. The camera must therefore be protected against extended exposure to direct sunlight.
• Attaching the lens cap and keeping the camera in the shade or ideally in its camera case, will help prevent damage to the interior of the camera.

RECHARGEABLE BATTERY

• Improper use of the batteries or the use of unapproved battery types may result in an explosion!
• Do not expose the rechargeable battery to sunlight, heat, humidity or moisture for prolonged periods of time. Likewise, the batteries must not be placed in a microwave oven or a high-pressure container as this would pose a fire or explosion hazard.
• Do not under any circumstances charge or insert a damp or wet battery into the camera!
• A safety valve in the battery ensures that any excess pressure caused by improper handling is discharged safely. It is nevertheless important to dispose of a bloated battery immediately. It may pose an explosion hazard!
• Keep the battery contacts clean and easily accessible. Although lithium-ion batteries are secured against short circuits, they should still be protected against contact with metal objects like paper clips or jewelry. A short-circuited battery can get very hot and cause severe burns.
• When a battery is accidentally dropped, make sure to check the housing and the contacts immediately for any damage. A damaged battery can damage the camera.
• The battery must be removed from the camera or charger and must be replaced immediately in case of a strange smell, discoloration, deformation, overheating or leakage. Continued use of the battery may result in overheating, which can cause fire and/or explosion!
• Never throw batteries into a fire as they might explode!
• Keep the battery away from sources of heat in case of a leak or a smell of burning. Leaked fluid can catch fire!
• The use of other chargers not approved by Leica Camera AG can cause damage to the batteries – and in extreme cases – cause serious or life-threatening injuries.
• Make sure that the power socket is freely accessible at all times.
• The in-car charging cable must never be connected while the charger is connected to mains electricity.
• Do not attempt to open the battery or the charger. Repairs must only be carried out by authorized service centers.
• Keep batteries out of the reach of children. Batteries can cause suffocation when swallowed.

CHARGER

• Using the charger in the vicinity of broadcasting receivers may interfere with reception. Ensure a distance of at least 1 m (3 ft) between the charger and the receiver.
• When the charger is in use, it may emit a buzzing sound – this is normal and not a malfunction.
• Disconnect the charger from the mains when it is not in use, because it consumes some a very small amount electricity, even when no battery is inserted.
• Always keep the charger contacts clean, and never short circuit them.

MEMORY CARD

• Never remove the memory card during a datasave or card reading process. The camera must not be switched off or be subjected to impact or vibrations while working.
• Do not open the compartment or remove the memory card or battery while the status LED is flashing to indicate camera memory access. Data on the card may otherwise be destroyed and camera malfunctions may occur.
• Do not drop or bend memory cards as this will cause damage and result in the loss of stored data.
• Do not touch the connections on the reverse of the memory card and keep them clean and dry.
• Keep memory cards out of the reach of children. Swallowing a memory card may cause suffocation.

SENSOR

Cosmic radiation (e.g. during flights) may cause pixel defects.

CARRY STRAP

• Once you have attached the carry strap, please make sure that the clips are mounted correctly to prevent the camera from falling.
• Carry straps are usually made of very robust material. You should therefore keep it out of the reach of children. A carry strap is not a toy and poses a strangulation risk.
• Use the carry strap only for its intended purpose on a camera or on binoculars. Any other use poses the risk of injury and may possibly result in damage to the carry strap and is therefore not permitted.
• Carry straps should also not be used for cameras/binoculars during sports activities with a high risk of getting entangled in the carry strap (e.g. mountain climbing and similar outdoor activities).

TRIPOD

• When using a tripod, make sure it is standing securely and turn the camera only by turning the tripod, not the actual camera.
• Ensure that the tripod screw is hand-tightened only.
• Avoid transporting the camera while the tripod is attached. You might injure yourself or others and the camera could get damaged.

FLASH

The use of incompatible flash units with your Leica SL2 may result in irreparable damage to the camera and/or the flash unit.