NEC UX5000 Hardware Manual page 106

Chapter 2 - Blade Installation and Startup
CN2
CN3
CN4
Location for EXIFU
5.
2 - 26
Figure 2-9:
Figure 2-10:
Using only the NEC CAT5 straight-thru cables, attach one cable to each Base Chassis-B1's
CN3 connector on the EXIFU-E1. Attach the opposite end to the CN2, CN3 or CN4 connector
on the Controlling Chassis-B1's EXIFU-B1.
Components side
EXIFU-B1 BLADE COMPONENTS
EXIFU BLADE INSTALLATION
CN1
To Back
Plane
Chapter 2