NEC UX5000 Hardware Manual page 34

Chapter 1 - Installing the Chassis
4.
Figure 1-31:
5.
6.
Figure 1-32:
7.
1 - 24
Remove the two screws from the metal retaining bracket and remove the bracket.
●
This allows access to three battery compartments.
Pull Out
by Tab
Remove Screws
REMOVE RETAINING BRACKET AND BATTERY TRAYS
Pull out the first battery compartment using the tab on the front of the tray. Loosen the two
screws on the top of the cover and remove.
Remove the two screws holding in the metal retaining bracket and remove the bracket.
Loosen Screw
Remove Screw
REMOVE BATTERY TRAY COVER AND RETAINING BRACKET
Install two of the batteries into the compartment and reattach the metal retaining bracket.
Battery Tray
Metal Retaining Bracket
Battery Tray Cover
Loosen Screw
Remove Screw
Retaining Bracket
Chapter 1