Miscellaneous Blades; Router 4-Port (4Rtu) Blade (Figure 2-26) - NEC UX5000 Hardware Manual

S 2-6
ECTION

Miscellaneous Blades

2.6.1

Router 4-Port (4RTU) Blade (Figure 2-26)

This blade is an in-skin router for the UX5000 system for up to 4 ports. Using an RJ45, a connection can be
made directly to a PC. This blade combines multiple voice and data features into an in-skin converged
networking route. The Router blade includes a single T11 WAN interface or a single ThernetWAN and an
integrated 4-port managed Ethernet switch with VLAN support.
The Router blade provides:
●
High Speed Forwarding (Routing). IPsec forwarding ability is about 100 Mbps.
●
Supported Interface:
- T1 or 10/100 Base-TX Ethernet WAN Connectivity
- 10/100 Base-TX: 4 Port Mananaged Ethernet LAN Switch with VLAN and Port Mirroring Capabilities
●
VPN/Firewall
●
VoIP Application Layer Gateway (SIP, MGCP and H.323) Resolves NAT/Firewall Traversal Issues
●
QoS: Priority Queuing, Traffic Shaping, Diffserv Marking/Policing
●
VoIP Call Admission Control
Chapter 2
Figure 2-26: ROUTER BLADE
Chapter 2 - Blade Installation and Startup
2 - 51