Connector Pin-Outs On The Slidb; Installing An Slidb Daughter Board - NEC UX5000 Hardware Manual

2.5.3.1

Connector Pin-Outs on the SLIDB

2.5.3.2

Installing an SLIDB Daughter Board:

1.
2.
3.
Chapter 2
8SLIDB - CN2 (ports 9-12), CN3 (ports 13-16)
12345678
Included with the SLIDB are four plastic spacers. Install the plastic spacers onto either the
4SLIU or 8SLIU blade. Make sure to attach the spacers so that they extend out on the side of
the daughter board which has the CN1 connector.
Position the SLIDB's CN1 connector over the CN4 connector on the SLIU blade. Press the
boards together, ensuring the plastic spacers lock in place.
Install the SLIU blade into the slot.
Chapter 2 - Blade Installation and Startup
RJ61 Cable Connector -
48SLIDB - CN2 (ports 9-12)
Pin No.
1
2
3
4
5
6
7
8
Connection
Tip for port 4
Tip for port 3
Tip for port 2
Ring for port 1
Tip for port 1
Ring for port 2
Ring for port 3
Ring for port 4
2 - 47