Handlebar Switch; Hand Brake Lever Assemblies - Arctic Cat 2016 90 Utility Service Manual

Handlebar Switch

REMOVING
1. Disconnect the handlebar switch assembly wiring
connector.
YT218
2. Remove the handlebar switch assembly from the
handlebar.
KM544
MD2436
INSTALLING
1. Place the handlebar switch assembly onto the han-
dlebar. Tighten the screw securely.
MD2436
KM544
2. Connect the handlebar switch assembly wiring con-
nector.
YT218
Hand Brake Lever
Assemblies
! WARNING
After removing and installing brake-related components,
ALWAYS check and adjust brakes as necessary before
operating the ATV.
REMOVING
1. Remove the right handlebar grip.
2. Remove the cover from the throttle control housing
exposing the throttle cable; then remove the cable.
21