Arctic Cat 2016 90 Utility Service Manual page 23

MD2440
MD2439
3. Remove the front brake cables from their adjusters
by screwing the adjusters inward to loosen the
cables; then pulling them free.
MD2449
4. Loosen the 6 mm Allen-head screw securing the
front brake lever assembly and slide the assembly off
the handlebar.
MD2450
5. Place a suitable container beneath the left-hand brake
master cylinder.
22
6. Remove the brakeline hose bolt; then drain brake
fluid into the container. Account for two copper
washers.
KM208B
7. Remove the cap screws securing the hand brake
lever assembly to the handlebar and remove the hand
brake/master cylinder assembly.
KM208A
MD2442
INSTALLING
1. Slide the right brake lever assembly onto the handle-
bar; do not tighten the Allen-head screw completely
at this time.