Tub Area; Open The Door To Access The Following - Atag VA6111AF Manual

2.3 Tub area

Tub
Fitted externally to the tub:
Lateral uprights
Upper rear cross-member
Upper front cross-member
Lower front cross-member
Supports for upper basket wheels
External feed manifold to the upper spray arm
Sump assembly
Thermostat/temperature sensor + turbidity sensor
Water fill tank (short or long)
Drying duct/fan (if featured)
Fitted inside the tub:
Sliding guides for upper basket
Central drain filter
Large washing filter
Lower spray arm
Upper spray arm
Internal feed manifold to the upper spray arm
Upper/lower basket
Cap for water softening system (if featured)
Steam venting ring

Open the door to access the following:

3
Guides/wheel supports for upper basket
1.
Regulation knob for water softening system (if
2.
featured)
Salt reservoir cap (if featured)
3.
Integrated detergent/rinse-aid dispenser
4.
Control panel assembly
5.
Serial number plate
6.
Central drain filter
7.
Large washing filter
8.
Lower spray arm
9.
Upper spray arm
10.
Upper/lower basket (*)
11.
Worktop (free-standing versions only)
12.
(*) When replacing the EASY LIFT drum regulation assemblies, it is advisable to immerse them in hot water
for a few minutes, since they are easier to fit when softened.
SOI/TD - PR 7 599 38 70-09