Contents Safety instructions Maintenance and cleaning Cleaning the filters Disposal Prolonged periods of non-operation Frost precautions Economical and ecological dishwashing Moving the machine Installation instructions Something not working Building-in Service and spare parts Levelling Fixing to the adjacent units Hints for test centres Water supply connections Water inlet hose with safety valve Water outlet hose connection...
Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.
Installation instructions Any electrical and/or plumbing work required to install Water supply connections this appliance should be carried out by a qualified This dishwasher may be fed with either hot (max. 60°) or cold electrician and/or plumber or competent person. water.
Water outlet hose connection Electrical connection The end of the drain hose can be connected in the following Information concerning the electrical connection is given on the ways: rating plate on the edge of the dishwasher’s door. 1. To the sink outlet spigot, securing it to the underside of the Before plugging the appliance into the wall socket, make sure work surface.
Description of the appliance Upper basket spray arm and lower spray arm Water hardness dial Salt container Detergent dispenser Rinse aid dispenser Rating plate Filters...
The control panel Washing programmes On/Off button Delay start button Indicator lights Programme selection/cancel button Programme indicator lights Programme selection/cancel button (RESET): Audible signals the selection of a washing programme occurs by the means of Audible signals have been introduced to help indicate which this button, press it until the indicator light corresponding to the operations the dishwasher is performing.
Prior to using for the first time Before using your dishwasher for the first time: b) Setting electronically 1. Ensure that the electrical and water connections comply The dishwasher is factory set at level 5. with the installation instructions 2. Remove all packaging from inside the appliance 1.
Filling with dishwasher salt Rinse aid Only use salt specifically designed for use in Rinse aid is automatically added during the last rinse, ensuring dishwashers. thorough rinsing, and spot and streak free drying. All other types of salt not specifically designed for use in The dispenser, which is positioned inside the door, holds about a dishwasher, especially table salt, will damage the water 110 ml of rinse aid, which is sufficient for between 16 and 40...
In daily use Check if it’s necessary to refill with dishwasher salt or rinse Loading cutlery and dishes Sponges, household cloths and any object that can Load cutlery and dishes into the dishwasher. absorb water may not be washed in the dishwasher. Fill with dishwasher detergent .
The cutlery basket The upper basket Load smaller, fragile crockery and long, sharp cutlery in the Sharp knives and other items of cutlery with sharp edges upper basket. must be laid in the cutlery rack or in the upper basket to avoid the risk of injury.
Adjusting the height of the upper basket Use of detergent Only use detergents specifically designed for use in Maximum height of the dishes in dishwashers. upper basket lower basket Using no more than the correct amount of detergent With upper basket raised 22 cm 30 cm contributes to reducing pollution.
Different kinds of detergent Detergent tablets Use of "3 in 1" combi detergents Detergent tablets from different manufactures dissolve at These products are detergents with a combined cleaning, different rates. For this reason, some detergent tablets do not rinsing and salt function. attain their full cleaning power during short washing 1.
Washing programmes Programme Degree of soil Cycle description (2) Consumption values Energy Water Programme type of load consumption consumption duration (in kWh) (in litres) (in minutes) Hot prewash Intensive 70° Main wash up to 70°C Heavy soil. 2 warm rinses 120 - 130 1,7 - 1,9 23 - 25...
Starting a washing programme In this fully integrated appliance the controls are located on the Cancel a washing programme in progress top of the door. When selecting a washing programme, the Open the dishwasher’s door. Press the programme door needs to be slightly open. selection/cancel button for about 3 seconds, until the indicator light of the running programme turns off and the end of programme indicator light flashes, indicating that...
Maintenance and cleaning Clean the external surfaces of the machine and control panel 7. Put the flat filter (3) back in the base of the washing with a damp soft cloth. If necessary use only neutral compartment. detergents. Never use abrasive products, scouring pads or 8.
Something not working Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer..a fault code appears The dishwasher will not start or stops during operation and a sequence of intermittent audible signals are heard. Open the dishwasher’s door.
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load.
Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart). Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes"...