Timer (Electro-Mechanic Versions); Pcb (Electronic Versions); Door Handle; Pushbutton Array - Atag VA6111AF Manual

5.2.1

Timer (electro-mechanic versions)

(a) First remove the cover, then the two screws which secure the timer to the control panel.
(b) Pull out the knob/flange assembly.
Important: On certain series of dishwasher with different stylings, it is necessary to remove the knob before
removing the timer.
5.2.2

PCB (electronic versions)

(a) Detach the electrical connections
(b) Use a tool to release the four lateral anchor tabs
(c) Remove the board and its casing from the control panel.
(d) Release the light diffuser, if featured.
5.2.3

Door handle

(a) Use a screwdriver to release the handle pins from the
holes in the control panel.
(b) Remove the counterspring.
5.2.4

Pushbutton array

(a) Remove the two screws which secure the support to the control
panel.
(b) Remove the keys (pressure-fitted to the pushbutton array),
taking care not to damage the anchor tabs.
(c) Detach the pushbutton array from the support and detach the
electrical connections.
SOI/TD - PR
(b)
(d)
10 599 38 70-09