To Access Components From The Side - Atag VA6111AF Manual

(e)
(d)
(c)
1.4 To access components from the side, remove the relative lateral panel:
(a) First remove the worktop (see 1.1), the plinth and the lower front panel (1.2).
(b) Remove the three rear screws and the upper screw.
(c) Detach the lateral panel from the rear and slide away from the frontal anchor slot.
(b)
NB: Before laying the dishwasher on a side panel or on the rear panel
suck the water in the sump, for example by using a syringe, so as the
water does not reach the pressure switch tube or the tub.
SOI/TD - PR 5 599 38 70-09