Removing The Oven Door; Replacing The Oven Lamps - Parmco PPOV-6S-PYRO Installation And Operating Instructions Manual

REMOVING THE OVEN DOOR
You can remove the oven door for better access to the oven when cleaning.

Open the door fully.

Locate the hinge assembly (1).

Lift the hinge tab to the open position (2).

Gently close the door until the hinge assembly engages against the door (3).

Lift the door up and out at the same time.

To replace the door, reverse the above procedure making sure that the hinge is correctly
located on the small rebate in the hinge arm (4)
1
4
REPLACING THE OVEN LAMPS
WARNING: Ensure that the appliance is turned off before replacing the oven lamp/s to avoid
the possibility of electric shock.
Remove the cover of the lamp‐holder as shown below.
Remove the lamp and replace with a lamp resistant to high temperatures (300
following characteristics.

Voltage 220 ‐ 240V

Wattage: 25W

Type: E14
Replacement lamps are available from Parmco Appliances
2
3
o
C) with the
19