Clock Functions - Parmco PPOV-6S-PYRO Installation And Operating Instructions Manual

Changing the oven function
To change the oven function, press the
function is displayed.
Switching off the oven
Switch off the appliance using the On/Off
Speedcook
After an oven function is selected, use the Speedcook function
short time frame.
Important: Do not put the food to be cooked into the oven until Speedcook is completed and
the oven is operating using the desired function.
1. Set the desired function. If necessary, change the suggested temperature.
2. Press the Speedcook
another show that Speedcook is operating. When the set temperature is reached, the bars
of the heat indicator light up. An alarm will be heard. The symbol continues to flash, and
the oven continues heating according to the pre‐set oven function and temperature. You can
now place the food in the oven.
Memory function
The Memory function can be used to save a setting which is frequently used.
1. Set oven function, temperature and if necessary the clock functions Cook time and/or
End time .
2. Press and hold the button
saved.
3. Repeat steps 1‐2 to replace the previously saved setting with a new one.
Starting the Memory function
1. Switch the oven on using the button On/Off
2. Press the button
CLOCK FUNCTIONS
General instructions

After a clock function has been selected, the corresponding symbol flashes for 5 seconds.
During this time, the desired times can be set or modified using the

When the desired times has been set, the time set Countdown begins to count down.

The time set for Cook time and End time begins to count down when the selected
function starts.
or
button.
button. The symbol lights up: The bars flashing one after
for approx. 2 seconds until a beep is heard. The setting is
to call up the saved setting.
button repeatedly until the desired oven
to preheat the oven in a
.
or button.
9