Electrical Connection - Parmco PPOV-6S-PYRO Installation And Operating Instructions Manual

In order to ensure adequate ventilation, the back panel of the cabinet unit must be removed.
Installing the oven so that it rests on two strips of wood is preferable. If the oven rests on a
continuous, flat surface, there must be an aperture of at least 45×560mm.
 The panels of the adjacent cabinets must be made of heat‐resistant material. In particular,
cabinets with a veneer exterior must be assembled with glues that can withstand
temperatures of up to 120°C.
 In compliance with current safety standards, contact with the electrical parts of the oven
must not be possible once it has been installed.
 All parts, which ensure the safe operation of the appliance, must be removable only with the
aid of a tool.
 To fasten the oven to the cabinet, open the door of the oven and attach it by inserting the 4
wooden screws into the 4 holes located on the perimeter of the frame.
ELECTRICAL CONNECTION
Those ovens equipped with a supply cable are designed to operate on a 230V AC supply. The
wire for earthing the appliance is yellow‐green in colour.
21