Electrical Connection - Parmco OV-1 Dimoda Installation And Operating Instructions Manual

Data Label
The data label is located at the rear of the appliance. A duplicate data label is supplied to
adhere to a suitable accessible area next to the appliance. The data label on the appliance
must NEVER be removed.
Before any procedure, it is important to check that the appliance is DISCONNECTED
from the electrical mains. Parmco declines all responsibility for any damage deriving
from installations that are in breach of the regulations in force or from failure to comply
with these installation instructions.

ELECTRICAL CONNECTION

The appliance comes fitted with an approved 15 amp cord which may be connected to a
correctly earthed socket outlet. It is necessary that all installation and connections are
carried out by qualified personnel and that the connections meet all New Zealand
Regulatory Requirements.
Before connecting to the mains make sure that:
• The electrical counter, the safety valve, feed cable and socket are suitable to
withstand the maximum load requirements as detailed on the rating label.
• The supply system is regularly grounded as per New Zealand Regulations
• The socket or omnipolar switch can easily be reached after the appliance is installed.
• After connection of the appliance to the mains, ensure the cord does not come into
contact with any parts of this appliance subject to heating.
• Never use reductions, shunts, adaptors which can cause overheating or burning.
When handling this oven it is essential that you always use the purpose provided
handles recessed into the sides of the oven. This will ensure that the oven carcass
and door is not stressed by lifting. DO NOT use the door handle when lifting this
appliance into position. This could result in damage to the hinges.
19