Optical Mark Recognition Settings (Option) - Formax 6602 Series Operator's Manual

Except when no fold is required, the display shows a simple diagram of the document with
the fold positions. To change the fold positions press
required position of the relevant fold.
The next table shows possible fold positions:
Fold type
Single fold
Letter fold First fold
Second fold
Zig-zag fold First fold
Second fold
Double parallel First fold
fold
Second fold
Note
The display will indicate when entered positions are out of range.
3.9.5

Optical Mark Recognition Settings (Option)

For a full function description of Optical Mark
Recognition (OMR), see 4.2 "Optical Mark
Recognition (OMR)" on page 48. Flex-OMR is also
optional. Flex-OMR can read customer specific
codes.
In the "OMR settings" menu it is possible to enable
or disable the OMR function and to adjust the basic
settings for OMR.
The first "OMR settings" menu covers the following
settings:
• Code type: default is the setting "none": OMR is
disabled.
Change the setting using the
- 1-track OMR
- 2-track OMR (only OMR level 5)
Minimum position
75 mm (2.95")
25 mm (0.98") (extended
Folder)
75 mm (2.95")
25 mm (0.98") (extended
Folder)
Position first fold plus
25 mm (0.98")
75 mm (2.95")
25 mm (0.98") (extended
Folder)
Position first fold plus
25 mm (0.98")
75 mm (2.95")
25 mm (0.98") (extended
Folder)
Position first fold plus
25 mm (0.98")
button. The following codes are possible:
next to a fold. Enter the
Maximum position
Longest document length
minus 25 mm (0.98")
Longest document length
minus 50 mm (1.97")
Longest document length
minus 25 mm (0.98")
Longest document length
minus 100 mm (3.94")
Longest document length
minus 75 mm (2.95")
Longest document length
minus 50 mm (1.97")
Longest document length
minus 25 mm (0.98")
39