High Capacity Conveyor Belt (Cs-2) - Formax 6602 Series Operator's Manual

5. Fill the envelope hopper with envelopes,
positioned upside down. The flaps should face
the inserter (flap leading).
6. Tip over the envelopes.
7. Load the envelope feeder of the inserter with
about 50 envelopes.
8. Press the green start button.
The envelopes on the envelope hopper will be
transported towards the feeder of the inserter.
Envelopes will be transported and dropped in
the inserter feeder until the envelopes reach a
certain level. At that moment a sensor will
detect the envelopes and the high capacity
envelope hopper will stop transporting.
When the sensor does not detect envelopes anymore the hopper will start again and
the process will be repeated.
4.11

High Capacity Conveyor Belt (CS-2)

The high capacity conveyor belt is designed for envelope transport from the inserter or
franking device. The conveyor belt has two operation modes:
• The belt moves continuously.
• The belt moves in intervals. The belt moves about 45 mm (1.7 inch) each time a
sensor detects the passage of an envelope.
The guide plate and side guides prevent the envelopes from falling off the belt.
70