Thin Booklet Feeder; Feeding Documents - Formax 6602 Series Operator's Manual

4.4.5

Feeding Documents

To feed documents:
1. Squeeze the two blue handles A and B.
2. Shift the feeding plate C to the rear position.
3. Loosen the stack of documents and place them in the feeder.
BREs with flap down and leading (top side pointing to machine).
The feeding plate assembly will be shifted up automatically (when the system starts
processing) until documents/BREs are underneath the rubber paper pullers.
Note
When filling the Production Feeder, make sure that the document/BREs are positioned
parallel in relation to the feed plate to ensure correct feeding.
Note
When longer documents are used, plate C can be extended by pulling out the adjustable
feed plate extension.

4.5 Thin Booklet Feeder

The Thin Booklet Feeder is used to feed booklets,
regardless of the thickness of the cover, to the
document flow from the feeder to the inserter.
Because of the location of the Thin Booklet Feeder
(downstream the feeder module) documents feeded
by the Thin Booklet Feeder will not be folded.
When the Thin Booklet Feeder is added to the
configuration this is shown in the screens at the
display. The figure shows an example.
63