Copy A Job; Delete A Job - Formax 6602 Series Operator's Manual

6. Press to save the job with the entered settings under the specified job number
and name.
To name a job, see 3.9.7 "Job Name" on page 43.
7. Press
Test Run" on page 32).
3.11

Copy a Job

To copy existing job settings or AutoSet jobs to a new job:
1. Press
2. Enter the pin code.
The "job menu" opens (see 2.4.5 "Job Menu" on
page 16).
3. Press
The "copy job" menu appears.
4. Press the arrows if you want to select an other
job number to copy from or to copy to.
Note
You can only copy job settings to new jobs.
5. Press
6. Press
If all jobs are programmed the display shows "No more free jobs".
It is possible to copy an AutoSet job into a job. Before an AutoSet job can be copied
AutoSet must be defined successfully (see 3.7.1 "Using AutoSet" on page 28).
3.12

Delete a Job

To delete an existing job:
1. Press
46
to perform a test run with the new job settings (see "Perform a
from "main menu (2)" (see 2.4.1 "Main Menu" on page 11).
.
for details of the job to copy from.
to copy the job settings.
from "main menu (2)" (see 2.4.1 "Main Menu" on page 11).