Outputting System Information By Source Module; Default Output Rules Of System Information - H3C S5120-SI Series Operation Manual

Information
channel
number
9
Configurations for the seven output destinations function independently and take effect only after the
information center is enabled.

Outputting System Information by Source Module

The system is composed of a variety of protocol modules, board drivers, and configuration modules.
The system information can be classified, filtered, and output according to source modules. You can
use the info-center source ? command to view the supported information source modules.

Default Output Rules of System Information

The default output rules define the source modules allowed to output information on each output
destination, the output information type, and the output information level as shown in
indicates that by default and in terms of all modules:
All log information is allowed to be output to the Web interface; log information with severity level
equal to or higher than informational is allowed to be output to the log host; log information with
severity level equal to or higher than warning is allowed to be output to the console, monitor
terminal, and log buffer; log information is not allowed to be output to the trap buffer and the SNMP
module.
All trap information is allowed to be output to the console, monitor terminal, Web interface, and log
file; trap information with severity level equal to or higher than warning is allowed to be output to the
trap buffer and SNMP module; trap information is not allowed to be output to the log buffer.
All debugging information is allowed to be output to the console and monitor terminal; debugging
information is not allowed to be output to the log host, trap buffer, log buffer, the SNMP module and
Web interface,.
Table 1-3 Default output rules for different output destinations
Output
Modules
destinati
allowed
on
default
Console (all
modules)
default
Monitor
(all
terminal
modules)
Default
Default output destination
channel name
channel9 Not specified
LOG
Enabled/
Severity
disabled
Enabled Warning
Enabled Warning
debugging information.
Receives log, trap, and
debugging information.
TRAP
Enabled/
Severity
disabled
Enabled Debug
Enabled Debug
1-4
Description
Table 1-3, which
DEBUG
Enabled/
Severity
disabled
Enabled Debug
Enabled Debug