H3C S5120-SI Series Operation Manual page 668

Hide thumbs Also See for S5120-SI Series:

Table of Contents

[abc_0.SwitchB-cluster] holdtime 100

# Configure the interval to send handshake packets as 10 seconds.

[abc_0.SwitchB-cluster] timer 10

# Configure the FTP Server, TFTP Server, Log host and SNMP host for the cluster.

[abc_0.SwitchB-cluster] ftp-server 63.172.55.1

[abc_0.SwitchB-cluster] tftp-server 63.172.55.1

[abc_0.SwitchB-cluster] logging-host 69.172.55.4

[abc_0.SwitchB-cluster] snmp-host 69.172.55.4

# Add the device whose MAC address is 000f-e201-0013 to the blacklist.

[abc_0.SwitchB-cluster] black-list add-mac 000f-e201-0013

[abc_0.SwitchB-cluster] quit

# Add port GigabitEthernet 1/0/1 to VLAN 1 (by default, all ports belong to VLAN 1), and configure the IP

address of VLAN-interface 1.

[abc_0.SwitchB] quit

[abc_0.SwitchB] interface vlan-interface 1

[abc_0.SwitchB-Vlan-interface1] ip address 163.172.55.1 24

[abc_0.SwitchB-Vlan-interface1] quit

# Configure VLAN-interface 1 as the network management interface.

[abc_0.SwitchB] cluster

[abc_0.SwitchB-cluster] nm-interface vlan-interface 1

Chapters

Table of Contents