Console Port Login Configuration With Authentication Mode Being None; Configuration Procedure - H3C S5120-SI Series Operation Manual

Authentication
mode
Scheme
Changes of the authentication mode of Console port login will not take effect unless you exit and enter
again the CLI.
Console Port Login Configuration with Authentication Mode Being
None

Configuration Procedure

Follow these steps to perform Console port login configuration (with authentication mode being none):
To do...
Enter system view
Enter AUX user interface view
Configure not to authenticate
users
Configure
the Console
port
Console port login configuration
Specify to
perform local
authentication
or RADIUS
authentication
Configure user
name and
password
Manage AUX
users
Perform
common
configuration
Use the command...
system-view
user-interface aux 0
authentication-mode none
Set the baud
speed speed-value
rate
AAA configuration
Optional
specifies whether
Local authentication is performed by
to perform local
default.
authentication or
Refer to the AAA Configuration for
RADIUS
details.
authentication
Required
Configure user
names and
passwords for
local/remote users
Set service type for
Required
AUX users
Optional
Perform common
configuration for
Refer to
Console port login
details.
—
—
Required
By default, users logging in through
the
authenticated.
Optional
The default baud rate of an AUX
port (also the Console port) is 9,600
bps.
2-5
Description
The user name and password of
a local user are configured on the
switch.
The user name and password of
a remote user are configured on
the RADIUS server. Refer to user
manual of RADIUS server for
details.
Common Configuration
Remarks
Console port
for
are not