H3C S5120-SI Series Operation Manual page 4

Chapter
25-HABP
26-ACL
27-Device Management
28-NTP
29-SNMP
30-RMON
31-File System Management
32-System Maintaining and
Debugging
33-Basic System Configuration
34-Information Center
35-MAC Address Table
36-Cluster Management
37-HTTP
38-Stack Management
39-Appendix
Conventions
The manual uses the following conventions:
Command conventions
Convention
Boldface
italic
[ ]
{ x | y | ... }
[ x | y | ... ]
{ x | y | ... } *
[ x | y | ... ] *
&<1-n>
Introduces the configuration of HABP.
Introduces the configuration of ACL.
Introduces the configuration of rebooting a device, upgrading
device software and identifying and diagnosing pluggable
transceivers
Introduces the configuration of NTP and the related configuration.
Introduces the configuration of SNMP and the related
configuration.
Introduces the configuration of RMON and the related
configuration.
Introduces basic configuration for file system management.
Introduces daily system maintenance and debugging.
Introduces the configuration display and CLI features.
Introduces the configuration to analyze and diagnose networks
using the information center.
Introduces MAC address forwarding table management and the
related configuration.
Introduces the configuration of Cluster and the related
configuration.
Introduces the configuration of HTTP and HTTPS.
Introduces the configuration of Stack Management and the related
configuration.
List of acronyms.
The keywords of a command line are in Boldface.
Command arguments are in italic.
Items (keywords or arguments) in square brackets [ ] are optional.
Alternative items are grouped in braces and separated by vertical bars.
One is selected.
Optional alternative items are grouped in square brackets and
separated by vertical bars. One or none is selected.
Alternative items are grouped in braces and separated by vertical bars.
A minimum of one or a maximum of all can be selected.
Optional alternative items are grouped in square brackets and
separated by vertical bars. Many or none can be selected.
The argument(s) before the ampersand (&) sign can be entered 1 to n
Contents
Description