H3C S5120-SI Series Operation Manual page 478

[Switch-luser-client002] quit
# Configure the user authentication type as password and service type as SFTP.
[Switch] ssh user client002 service-type sftp authentication-type password
2) Configure the SFTP client
There are many kinds of SFTP client software. The following takes the PSFTP of Putty Version
0.58 as an example.
The PSFTP supports only password authentication.
# Establish a connection with the remote SFTP server.
Run the psftp.exe to launch the client interface as shown in
command:
open 192.168.1.45
Enter username client002 and password aabbcc as prompted to log into the SFTP server.
Figure 2-3 SFTP client interface
Figure
2-10
2-3, and enter the following