Displaying And Maintaining Basic Configurations - H3C S5120-SI Series Operation Manual

Modifying command level
All the commands in a view are defaulted to different levels, as shown in
can modify the command level based on users' needs to make users of a lower level use commands
with a higher level or improve device security.
Follow these steps to modify the command level:
To do...
Enter system view
Configure the command level in
a specified view
You are recommended to use the default command level or modify the command level under the
guidance of professional staff; otherwise, the change of command level may bring inconvenience to
your maintenance and operation, or even potential security problem.

Displaying and Maintaining Basic Configurations

To do...
Display information on system
version
Display information on the
system clock
Display information on terminal
users
Display the valid configuration
under current view
Display clipboard information
Display and save statistics the
running status of multiple
modules
During daily maintenance or when the system is operating abnormally, you need to display the running
status of each functional module to locate the problem. Generally, you need to execute the
corresponding display commands for each module, because each module has independent running
information. To collect more information at one time, you can execute the display
diagnostic-information command to display or save the statistics of the running status of multiple
modules in the system. Execution of the display diagnostic-information command equals execution
of the commands
current-configuration one by one.
Use the command...
system-view
command-privilege level
level view view command
Use the command...
display version
display clock
display users [ all ]
display this [ by-linenum ]
display clipboard
display
diagnostic-information
display clock, display
1-15
Table
—
Required
Refer to Table 1-3
default settings.
Available in any view
version, display device,
1-3. The administrator
Remarks
for the
Remarks
and display