For details about the port link-type, port hybrid pvid vlan, and port hybrid vlan commands, refer to
VLAN Commands.
Configuring Multicast VLAN Ports
In this approach, you need to configure a VLAN as a multicast VLAN and then assign user ports to this
multicast VLAN by either adding the user ports in the multicast VLAN or specifying the multicast VLAN
on the user ports. These two configuration methods give the same result.
Configuring multicast VLAN ports in multicast VLAN view
Follow these steps to configure multicast VLAN ports in multicast VLAN view:
To do...
Enter system view
Configure the specified VLAN as
a multicast VLAN and enter
multicast VLAN view
Assign ports to the multicast
VLAN
Configuring multicast VLAN ports in interface view or port group view
Follow these steps to configure multicast VLAN ports in interface view or port group view:
To do...
Enter system view
Configure the specified VLAN
as a multicast VLAN and enter
multicast VLAN view
Return to system view
Enter interface view or port
group view
Configure the current port(s) as
port(s) of the multicast VLAN
Use the command...
system-view
multicast-vlan vlan-id
port interface-list
Use this command...
system-view
multicast-vlan vlan-id
quit
interface interface-type
interface-number
port-group manual
port-group-name
port multicast-vlan vlan-id
2-4
Remarks
—
Required
Not a multicast VLAN by
default
Required
By default, a multicast VLAN
has no ports.
Remarks
—
Required
Not a multicast VLAN by
default.
—
Required
Use either command.
Required
By default, a user port does not
belong to any multicast VLAN.