Device Management Overview; Device Management Configuration Task List; Configuring The Exception Handling Method - H3C S5120-SI Series Operation Manual

1
Device Management
When configuring device management, go to these sections for information you are interested in:

Device Management Overview

Device Management Configuration Task List

Configuring the Exception Handling Method

Rebooting a Device
Configuring the Scheduled Automatic Execution Function
Upgrading Device Software
Clearing the 16-bit Interface Indexes Not Used in the Current System
Identifying and Diagnosing Pluggable Transceivers
Displaying and Maintaining Device Management Configuration
Device Management Configuration Examples
Device Management Overview
Device Management Configuration Task List
Complete these tasks to configure device management:
Configuring the Exception Handling Method
Rebooting a Device
Configuring the Scheduled Automatic Execution Function
Upgrading the Boot ROM Program Through Command Lines
Upgrading the Boot File Through Command Lines
Clearing the 16-bit Interface Indexes Not Used in the Current System
Identifying and Diagnosing Pluggable Transceivers
Configuring the Exception Handling Method
When the system detects any software abnormality, it handles the situation with one of the following two
methods:
reboot: The system recovers itself through automatic reboot.
maintain: The system maintains the current situation, and does not take any measure to recover
itself. Therefore, you need to recover the system manually, such as reboot the system. Sometimes,
it is difficult for the system to recover, or some prompts that are printed during the failure are lost
after the reboot. In this case, you can use this method to maintain the abnormal state to locate
problems and recover the system.
Task
1-1
Remarks
Optional
Optional
Optional
Optional
Optional
Optional
Optional