H3C S5120-SI Series Operation Manual page 29

To do...
Set the
baud rate
Set the
check
Configure
mode
the
Console
port
Set the stop
bits
Set the
data bits
Configure the command
level available to users
logging in to the user
interface
Define a shortcut key for
starting terminal sessions
Define a shortcut key for
aborting tasks
Make terminal services
available to the user
interface
Set the maximum number
of lines the screen can
contain
Set history command
buffer size
Set the timeout time for
the user interface
Use the command...
speed speed-value
parity { even | mark | none
| odd | space }
stopbits { 1 | 1.5 | 2 }
databits { 5 | 6 | 7 | 8 }
user privilege level level
activation-key character
escape-key { default |
character }
shell
screen-length
screen-length
history-command
max-size value
idle-timeout minutes
[ seconds ]
2-9
Remarks
Optional
The default baud rate of an AUX port
(also the Console port) is 9,600 bps.
Optional
By default, the check mode of a Console
port is set to none, that is, no check bit.
Optional
The default stop bits of a Console port is
1.
Optional
The default data bits of a Console port is
8.
Optional
By default, commands of level 3 are
available to users logging in to the AUX
user interface.
Optional
By default, pressing Enter key starts the
terminal session.
Optional
The default shortcut key combination for
aborting tasks is < Ctrl + C >.
Optional
By default, terminal
available in all user interfaces.
Optional
By default, the screen can contain up to
24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.
Optional
The default history command buffer size
is 10. That is, a history command buffer
can store up to 10 commands by default.
Optional
The default timeout time of a user
interface is 10 minutes.
With the timeout time being 10 minutes,
the connection to a user interface is
terminated if no operation is performed in
the user interface within 10 minutes.
You can use the
command to disable
function.
services are
idle-timeout 0
the timeout