Enabling The Listening Port Of The Radius Client; Displaying And Maintaining Radius - H3C S5120-SI Series Operation Manual

To do...
Set the retransmission interval
of accounting-on packets
The accounting-on feature needs to cooperate with the H3C iMC network management system.

Enabling the Listening Port of the RADIUS Client

Follow these steps to enable the listening port of the RADIUS client:
Enter system view
Enable the listening port of the RADIUS
client

Displaying and Maintaining RADIUS

To do...
Display the configuration
information of a specified RADIUS
scheme or all RADIUS schemes
Display statistics about RADIUS
packets
Display information about buffered
stop-accounting requests that get
no responses
Clear RADIUS statistics
Clear buffered stop-accounting
requests that get no responses
accounting-on
interval seconds
To do...
display radius scheme
[ radius-scheme-name ]
display radius statistics
display stop-accounting-buffer
{ radius-scheme
radius-server-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
reset radius statistics
reset stop-accounting-buffer
{ radius-scheme
radius-server-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
Use the command...
enable
Use the command...
system-view
radius client enable
Use the command...
1-27
Remarks
Optional
3 seconds by default
Remarks
—
Optional
Enabled by default
Remarks
Available in any view
Available in any view
Available in any view
Available in user view
Available in user view