Mib Style Configuration; Setting The Mib Style; Displaying And Maintaining Mib - H3C S5120-SI Series Operation Manual

2

MIB Style Configuration

When configuring MIB style, go to these sections for information you are interested in:

Setting the MIB Style

Displaying and Maintaining MIB

H3C private MIB involves two styles, H3C compatible MIB and H3C new MIB. In the H3C compatible
MIB style, the device sysOID is under the H3C's enterprise ID 25506, and the private MIB is under the
enterprise ID 2011. In the H3C new MIB style, both the device sysOID and the private MIB are under the
H3C's enterprise ID 25506. These two styles of MIBs implement the same management function except
for their root nodes. A device is shipped with MIB loaded and the MIB style may vary depending on the
device model. To implement NMS's flexible management of the device, the device allows you to
configure the MIB style, that is, you can switch between the two styles of MIBs. However, you need to
ensure that the MIB style of the device is the same as that of the NMS.
Setting the MIB Style
Follow these steps to set the MIB style:
To do...
Enter system view
Set the MIB style of the device
The modified MIB style takes effect only after you reboot the device. Therefore, you are recommended
to reboot the device after setting the MIB style to ensure that modification of the MIB style takes effect.
Displaying and Maintaining MIB
To do...
Display the MIB style
Use the command...
system-view
mib-style [ new | compatible ]
Use the command...
display mib-style
2-1
Remarks
—
Optional
new by default
Remarks
Available in any view