H3C S5120-SI Series Operation Manual page 411

This example assumes that the RADIUS server runs iMC PLAT 3.20-R2602 or iMC UAM 3.60-E6102.
# Add an access device.
Log into the iMC management platform, select the Service tab, and select Access Service > Service
Configuration from the navigation tree to enter the Service Configuration page. Then, click Add to
enter the Add Access Device window and perform the following configurations:
Set both the shared keys for authentication and accounting packets to expert
Specify the ports for authentication and accounting as 1812 and 1813 respectively
Select Device Management Service as the service type
Select H3C as the access device type
Select the access device from the device list or manually add the device with the IP address of
10.1.1.2
Click OK to finish the operation
Figure 1-8 Add an access device
# Add a user for device management
Log into the iMC management platform, select the User tab, and select Access User View > All
Access Users from the navigation tree to enter the All Access Users page. Then, click Add to enter
the Add Device Management User window and perform the following configurations:
Add a user named hello@bbb and specify the password
Select SSH as the service type
Specify the IP address range of the hosts to be managed as 192.168.1.0 to 192.168.1.255, and
click Add to finish the operation
1-30