Lcd Contrast; Security - Konica Minolta bizhub C30P Service Manual

Field Service Ver. 2.0 May 2007
9.9.11

LCD CONTRAST

Function • Sets the brightness of the control panel LCD display.
Use • To set the brightness of the control panel LCD display.
Setting The default setting is 0.
/procedure
-3
9.9.12

SECURITY

A. CHANGE PASSWORD
Function • Sets the password used for the lock panel function.
• To change the password used for the lock panel function.
Use 0000
0001 to FFFF : Valid password for panel lock function.
Setting 1. Select [CHANGE PASSWORD] and press the Menu/Select key.
/procedure 2. Set desired password (first digit) with the up key /down key
key .
3. Repeat the above procedures to set up to fourth digit password.
• The default setting is 0000.
NOTE
• Make sure to set the password to something other than "0000" when the
[LOCK PANEL] function is set to [ON].
• If you forget the password, it can be initiated (0000) with [SERVICE MENU/
RESTORE PASSWORD].
See P.173
B. LOCK PANEL
Function • Protects the menu (except the service menu) with a password.
Use • To make the menu (except the service menu) impossible to change unless the cor-
rect password is entered.
OFF
MINIMUM : Panel lock function is ON. Protect the operation of [INTERFACE
ON
Setting • The default setting is "OFF."
/procedure
-2 -1
: Panel lock function is OFF.
"0000" to FFFF
: Panel lock function is OFF.
MENU], [SYS DEFAULT MENU].
: Panel lock function is ON.
Protect the operation of [PROF/PRINT MENU], [PRINT MENU],
[PAPER MENU], [QUALITY MENU], [INTERFACE MENU], [SYS
DEFAULT MENU].
"OFF" MINIMUM
"0" +1 +2
and press the right
ON
9. Menu
+3
145