Hold Job Timeout; Energy Saver; Energy Saver Time; Menu Timeout - Konica Minolta bizhub C30P Service Manual

9. Menu
9.9.7

HOLD JOB TIMEOUT

Function • Sets the amount of time before a job saved temporarily in the printer is automatically
deleted.
Use • To change the amount of time a job is held before being deleted.
Setting • The default setting is DISABLE (No auto delete.).
/procedure
"DISABLE"
NOTE
• This menu is available only when an optional hard disk kit is installed.
9.9.8

ENERGY SAVER

Function • Sets whether the printer should go into energy saver mode when not printing or pro-
cessing a print job and when the control panel is not being used. To set the amount of
time before energy saver mode is activated, use the "ENERGY SAVER TIME" menu.
• Energy saver mode is automatically cancelled when any of the following operations is
performed:
The machine is restarted.
A print job is received.
Any of the keys on the control panel is pressed.
Use • To specify whether energy saver mode is to be used.
Setting • The default setting is ON.
/procedure
9.9.9

ENERGY SAVER TIME

Function • Sets the amount of time before the machine enters energy saver mode after the last
print is received or the last key operated.
Use • To change the amount of time before the machine enters energy saver mode.
Setting • The default setting is 30 minutes.
/procedure
5 minutes
NOTE
• This menu is available only when [ENERGY SAVER] is not set to "OFF."
9.9.10

MENU TIMEOUT

Function • Sets the amount of time before the control panel returns to the status screen from
menu mode and the help display.
Use • To set the amount of the time before the control panel returns to the status screen
from the menu and the help display.
Setting • The default setting is 2 minutes.
/procedure
144
1 hour 4 hours
"ON"
15 minutes
OFF 1 minute
Field Service Ver. 2.0 May 2007
1 day
OFF
"30 minutes" 1 hour
"2 minutes"
1 week
3 hours