11. Service Menu; 11.1 How To Enter The Service Menu - Konica Minolta bizhub C30P Service Manual

11. SERVICE MENU

11. SERVICE MENU

11.1 How to enter the service menu

NOTE
• Make sure not to reveal the password of the service menu to any unauthorized per-
son.
A. Procedure 1
1. Display [SERVICE MENU] on the menu screen and press the Menu/Select key.
2. [ENTER PASSWORD] message is displayed.
3. Set first digit of password with the up key /down key
4. Repeat the above procedures to set up to seventh digit of password.
Enter "KMBC30P" for service password.
NOTE
• The service password needs to correspond to the product name.
5. Press the Menu/Select key.
B. Procedure 2
1. Turn the power switch ON while pressing the up key
power switch OFF.
NOTE
• Continue to press the up key
sage appears on the control panel.
2. When initializing is complete, the service menu appears.
NOTE
• Password authentication is not required before starting to operate the service
menu, however, once the service menu is closed, you need to enter the password
to display the service menu again.
C. Exiting
• Press the Cancel key.
162
and the menu/select key at the
and the menu/select key until "INITIALIZING" mes-
Field Service Ver. 2.0 May 2007
and press the right key .