Media Feed Clutch /2 (Cl3) - Konica Minolta bizhub C30P Service Manual

Field Service Ver. 2.0 May 2007
6.3.34

Media feed clutch /2 (CL3)

1. Remove the PWB box /1.
See P.67
2. Remove the PWB box /2.
See P.68
[2]
[1]
[1]
[1]
A011F2C083DA
[1]
A011F2C084DA
[3]
[2]
A011F2C085DA
3. Disconnect the white connector [1]
and the blue connector [2].
4. Remove four screws [2].
5. Remove the gear [1] and the gear
[2].
NOTE
• When the media feed clutch /2 is
reinstalled, replace the gears that
have been removed, as these gears
could have been damaged.
6. Remove the media feed and trans-
port assy [3].
6. Other
79