Konica Minolta bizhub C30P Service Manual page 174

Field Service Ver. 2.0 May 2007
(3) SUBNET MASK
Function • Sets the subnet mask of the printer used in the network.
Use • To set the printer's subnet mask.
Setting 1. Select [SUBNET MASK] and press the Menu/Select key.
/procedure 2. Set desired subnet mask (first bite) with the up key /down key
key
3. Repeat the above procedures and set the subnet mask up to fourth bite.
4. Press the Menu/Select key.
• The default setting is "255.255.000.000."
(4) DEFAULT GATEWAY
Function • Sets the gateway address of the printer used in the network.
Use • To set the printer's gateway address.
Setting 1. Select [DEFAULT GATEWAY] and press the Menu/Select key.
/procedure 2. Set desired default gateway address (first bite) with the up key /down key
press the right key .
3. Repeat the above procedures and set the default gateway address up to fourth bite.
4. Press the Menu/Select key.
• The default setting is "000.000.000.000."
(5) DHCP/BOOTP
Function • DHCP: Automatically acquires an IP address from the DHCP server, if there is one
• BOOTP: Automatically acquires an IP address from BOOTP and specifies whether to
• To automatically acquire an IP address and load other network information.
Use YES : Enable IP auto acquisition setting.
No
Setting • The default setting is ON.
/procedure
NOTE
• When [TCP/IP/IP ADDRESS] is enabled, the [DHCP/BOOTP] setting is changed
to [OFF."
• When IP address is not allocated from the server, [TCP/IP/IP ADDRESS] is set
automatically set within the range "169.254.0.0. to 169.254.255.255."
(6) TELNET
Function • Select whether to enable or disable TELNET transmissions.
Use • To specify that the printer is connected by TELNET transmissions.
Setting • The default setting is ENABLE.
/procedure
.
000.000.000.000 to 255.255.255.255
000.000.000.000 to 255.255.255.255
in the network, and specifies whether to load other network information.
load other network information.
: Disable IP auto acquisition setting.
"ON"
"ENABLE"
9. Menu
and press the right
and
OFF
DISABLE
137