Energy Saver; Energy Saver Time; Menu Timeout; Lcd Brightness - Konica Minolta magicolor 7450 Service Manual

9. Menu
9.8.7

ENERGY SAVER

Function • Sets whether the printer should go into Energy Saver mode when not printing or pro-
cessing a print job and when the Control Panel is not being used. To set the amount
of time before Energy Saver mode is activated, use the "ENERGY SAVER TIME"
menu.
• Energy Saver mode is automatically canceled when any of the following operations is
performed:
The machine is restarted.
A print job is received.
Any of the keys on the Control Panel is pressed.
Use • To specify whether Energy Saver mode is to be used.
Setting • The default setting is DEEP SLEEP.
/procedure
9.8.8

ENERGY SAVER TIME

Function • Sets the amount of time before the machine enters Energy Saver mode after the last
print is received or the last key operated.
Use • To change the amount of time before the machine enters Energy Saver mode.
Setting • The default setting is 30 minutes.
/procedure
15 minutes
NOTE
• This menu is available only when [ENERGY SAVER] is not set to [OFF].
9.8.9

MENU TIMEOUT

Function • Sets the amount of time before the Control Panel returns to the status screen from
menu mode and the help display.
Use • To set the amount of the time before the Control Panel returns to the status screen
from the menu and the help display.
Setting • The default setting is 2 minutes.
/procedure
9.8.10

LCD BRIGHTNESS

Function • Sets the brightness of the Control Panel LCD display.
Use • To set the brightness of the Control Panel LCD display.
Setting The default setting is 0.
/procedure
-3
128
"DEEP SLEEP"
"30 minutes"
OFF 1 minute
-2 -1
Field Service Ver. 1.0 May 2006
LIGHT SLEEP
1 hour
"2 minutes"
"0" +1
OFF
3 hours
+2 +3