12. Other Functions; Rewriting Security Information Into The Hard Disk Kit And The Compact Flash; Outline; Procedure - Konica Minolta bizhub C30P Service Manual

12. Other functions

12. Other functions
12.1 Rewriting security information into the hard disk kit and the
compact flash
12.1.1

Outline

• When the optional hard disk kit and compact flash are formatted, they save the values
specific to the print control board (PRCB) installed in each printer.
Because of this, the hard disk kit and compact flash that have been used in a printer can-
not be used in a different printer, in this way, job and account information stored in the
hard disk kit and compact flash are protected.
• There may be cases where the print control board is damaged and replaced, in that
case, it is required to rewrite security information into the user's current hard disk kit and
compact flash in order to continue to use the data included in the hard disk kit and com-
pact flash.
• Without rewriting new security information, the hard disk kit and compact flash can be
used if they are formatted again.
12.1.2

Procedure

1. After the print control board (PRCB) replacement, in the condition of the hard disk and
the compact flash being installed, turn the power switch ON while pressing the up
key and the cancel key.
NOTE
• Continue to press the up key
appears on the control panel.
2. After startup, "REWRITING SECURITY" message will appears.
3. When the menu/select key is pressed, the printer starts rewriting security information
and then start operating. (If the cancel key is pressed, the printer starts operating with-
out rewriting security information.)
174
and the cancel key until "INITIALIZING" message
REWRITING SECURITY?
Y: PRESS SELECT
N: PRESS CANCEL
INITIALIZING
AND REWRITING
Field Service Ver. 2.0 May 2007
A011F3C507DA
A011F3C508DA