Energy Saver Time; Menu Timeout; Lcd Contrast; Security - Konica Minolta pagepro 5650EN Service Manual

9. Menu
9.8.7

ENERGY SAVER TIME

Function • Sets the amount of time before the machine enters energy saver mode after the last
print is received or the last key operated.
Use • To change the amount of time before the machine enters energy saver mode.
Setting • The default setting is 5 minutes.
/procedure
5 minutes/6 minutes/7 minutes/8 minutes/9 minutes/10 minutes/11 minutes/12 minutes/
13 minutes/14 minutes/15 minutes/30 minutes/1 hour
9.8.8

MENU TIMEOUT

Function • Sets the amount of time before the control panel returns to the status screen from
menu mode and the help display.
Use • To set the amount of the time before the control panel returns to the status screen
from the menu and the help display.
Setting • The default setting is 2 minutes.
/procedure
9.8.9

LCD CONTRAST

Function • Sets the brightness of the control panel LCD display.
Use • To set the brightness of the control panel LCD display.
Setting The default setting is 0.
/procedure
-3
9.8.10

SECURITY

A. CHANGE PASSWORD
Function • Sets the password used for the lock panel function.
• To change the password used for the lock panel function.
Use 0000
0001 to FFFF : Valid password for panel lock function.
Setting 1. Select [CHANGE PASSWORD] and press the Menu/Select key.
/procedure 2. Set desired password (first digit) with the up key /down key
key .
3. Repeat the above procedures to set up to fourth digit password.
• The default setting is 0000.
NOTE
• Make sure to set the password to something other than "0000" when the
[LOCK PANEL] function is set to [ON].
• If you forget the password, it can be initiated (0000) with [SERVICE MENU/
RESTORE PASSWORD].
See P.145
120
OFF 1 minute
-2 -1
: Panel lock function is OFF.
"0000" to FFFF
Field Service Ver. 1.0 Nov. 2007
"2 minutes"
"0" +1 +2
and press the right
+3