Normal Messages - Konica Minolta bizhub C30P Service Manual

8. Description of the control panel
8.1.3

Normal messages

• The basic screen is displayed after warmup has been completed.
• The "READY LED
Display
LCD 1 Printer mode is displayed. (Normally, "READY" is displayed.)
LCD 2
The message is displayed. (Normally, no message is displayed.)
LCD 3
Key guidance is displayed.
• Normally "MENU to enter" is displayed.
LCD 4 When the MENU key is pressed, the panel displays the MENU screen.
• When a WARNING message is displayed, "
When the Down key
State
Message
Key guidance
A. Toner-remaining level gauge
• The amount of each color of toner remaining is graphed in 10% increments (11 scales.)
However, it's not displayed during the following states:
- Operator Call
- Service Call
- Menu
- Help menu
- BOOT message
- When the toner remaining amount is not determined immediately after startup.
- When using toner made by companies other than Konica Minolta
90
" lights up while the message is displayed.
Description
is pressed, the panel displays the HELP screen.
READY
to enter
YMCK
Field Service Ver. 2.0 May 2007
for help" is also displayed.
Toner-remaining
level gauge
YMCK
Toner-remaining amount
100% (Full)
Toner-remaining amount
0% (Empty)
Toner color display
A011F3E505DA